{"id":550,"date":"2026-10-09T00:36:46","date_gmt":"2026-10-08T16:36:46","guid":{"rendered":"http:\/\/www.jorgeluislh.com\/blog\/?p=550"},"modified":"2026-10-09T00:36:46","modified_gmt":"2026-10-08T16:36:46","slug":"what-is-the-demulsibility-of-mine-lubricating-oil-series-40a3-e74ffa","status":"publish","type":"post","link":"http:\/\/www.jorgeluislh.com\/blog\/2026\/10\/09\/what-is-the-demulsibility-of-mine-lubricating-oil-series-40a3-e74ffa\/","title":{"rendered":"What is the demulsibility of Mine Lubricating Oil Series?"},"content":{"rendered":"

What is the demulsibility of Mine Lubricating Oil Series? Mine Lubricating Oil Series<\/a><\/p>\n

<\/p>\n

If you\u2019ve ever walked through a busy mine site\u2014especially during the pre-shift safety briefing, when the hum of haul trucks and conveyor belts starts to pick up\u2014you\u2019ll notice one thing the team talks about more than most, besides roof support and blasting schedules: lubrication. Not just any lubrication, though. Mine equipment runs in conditions most industrial machinery would never see: constant exposure to groundwater, seam water, rainwater that seeps into pit works, and even slurry from coal or ore processing. That\u2019s why when I get a call from a mine maintenance manager asking about our Mine Lubricating Oil Series, one of the first technical terms I break down with them is demulsibility. Most people outside mining might not know what that word means, but spend five minutes in our line of work, and it\u2019s the difference between a smoothly operating dragline and a $200,000 repair bill for a stuck hydraulic system.<\/p>\n

Let\u2019s start with the basics. Demulsibility, in simple terms, is a lubricant\u2019s ability to separate from water and resist forming a stable emulsion when the two mix. For mine lubricants, this isn\u2019t a nice-to-have feature\u2014it\u2019s a non-negotiable requirement. Mine machinery doesn\u2019t operate in a climate-controlled factory; it\u2019s often parked in wet pits, splashed by runoff, and bathed in the fine dust that turns to mud when mixed with water. When lubricant and water mix, they form a creamy, stubborn emulsion that acts like a sponge in your equipment: it doesn\u2019t lubricate properly, it traps contaminants, and it accelerates wear on critical parts like gears, bearings, and hydraulic pumps. That\u2019s where our Mine Lubricating Oil Series is designed to stand apart from generic industrial oils you might find at a standard auto parts store.<\/p>\n

Let me give you a real example from a mine we supply in central West Virginia. A few years back, they were using a standard hydraulic oil for their fleet of underground shuttle cars. Within six months, they started seeing unexpected pump failures. The maintenance team pulled a sample and sent it to our lab for testing. Turns out, the standard oil had a demulsibility rating that meant it took 45 minutes to separate from water. In the wet mine, water was getting into the hydraulic system every time they opened the reservoir to check levels, and the slow separation meant the emulsion was circulating through the pumps, eating away at the bronze bearings and seals. When they switched to our Mine Hydraulic Oil, which has a demulsibility time of under 15 minutes for the same test conditions, the pump failures dropped to almost zero. The maintenance manager told me later that they saved over $120,000 a year in repair costs and downtime just from that switch. That\u2019s the kind of real-world impact demulsibility has for mine operations.<\/p>\n

Now, you might be wondering: how do we measure demulsibility, and why does our Mine Lubricating Oil Series perform so well in these tests? The standard industry test for demulsibility is ASTM D2710, which simulates the conditions of lubricant and water mixing under mechanical agitation\u2014like what happens when a gear rotates or a pump pushes fluid through a system. The test involves mixing 40 milliliters of lubricant, 40 milliliters of water, and 1 gram of a specific emulsifying agent for five minutes, then letting the mixture sit undisturbed. The time it takes for the oil and water to separate into clear, distinct layers\u2014with no more than 3 milliliters of emulsion remaining between them\u2014is the demulsibility rating. Most generic industrial oils have a rating of 30 to 60 minutes, but for mine lubricants, we target a rating of 10 to 15 minutes. Why? Because in a mine, water doesn\u2019t wait around. If a gallon of water gets into your 50-gallon hydraulic system, you can\u2019t afford to have it sitting there mixing with your lubricant for an hour. Our series is formulated with specialized demulsifier additives that break the bond between oil and water molecules without affecting the lubricant\u2019s other key properties\u2014like viscosity, wear protection, or load-carrying capacity.<\/p>\n

It\u2019s important to note that not all mine equipment has the same demulsibility requirements. A dragline on the surface, which is exposed to heavy rainfall and large amounts of runoff, needs a different demulsibility profile than an underground longwall shearer, where water is more likely to seep through seals than mix under high agitation. That\u2019s why our Mine Lubricating Oil Series isn\u2019t a one-size-fits-all product. We work closely with each mine\u2019s engineering and maintenance team to assess their specific conditions: how much water their equipment is exposed to, the type of machinery, the operating temperature, and even the local water chemistry (which can vary drastically from one mine to another, depending on the rock and soil layers). For example, for a mine in northern Alberta where the groundwater has high mineral content, we formulate our gear oils with demulsifiers that are resistant to hard water, so they don\u2019t break down or lose their separation ability when mixed with mineral-rich water. For a mine in the Pacific Northwest with frequent, heavy rain, our surface equipment oils have extra demulsibility boosters to handle the constant water exposure.<\/p>\n

One common mistake we see mine operators make is choosing a lubricant solely on price, without checking the demulsibility rating. I can\u2019t tell you how many times a general manager will call me upset because their equipment is having water-related issues, and when we look at the purchase order, it\u2019s clear they went with the cheapest oil available. Generic oils often skip the specialized demulsifier additives to cut costs, which means they might pass the basic ASTM D2710 test, but fail in the harsh mine environment. In a mine, downtime isn\u2019t just an inconvenience\u2014it costs tens of thousands of dollars per hour. A single haul truck being out of service because of water-related pump failure can cost a mine $50,000 or more in lost production. Investing in a lubricant with proper demulsibility isn\u2019t an extra cost; it\u2019s a way to protect your investment in equipment and keep your operation running smoothly.<\/p>\n

Let\u2019s talk about how demulsibility affects different types of lubricants in our Mine Lubricating Oil Series, because not every product is the same. Our Mine Hydraulic Oil Series, for example, has a demulsibility time of under 15 minutes at 54\u00b0C (130\u00b0F), which is the average operating temperature for most underground shuttle cars and continuous miners. This is critical because hydraulic systems operate under high pressure, and even small amounts of emulsified water can cause cavitation, which damages pumps and reduces efficiency. Our Mine Gear Oil Series, used for large gearboxes on draglines, conveyors, and longwall systems, has a slightly longer demulsibility time\u2014usually around 20 to 25 minutes\u2014but that\u2019s by design. Gear oils need a certain amount of additives to handle extreme pressure (EP) loads, and we balance those with demulsifiers to make sure water is separated quickly enough without reducing the EP protection. For our Chain Lubricants, used for scraper chains and conveyor chains that are constantly exposed to ore slurry and water, we have a unique water-repellent demulsibility profile that not only separates from water but also forms a thin, protective layer on the chain surface to prevent corrosion.<\/p>\n

Another key point about demulsibility in mine lubricants is that it\u2019s not a static property. Over time, as lubricant breaks down from heat, contaminants, and oxidation, its demulsibility rating can drop. That\u2019s why regular oil analysis is part of our full service for mine customers. We offer free oil sampling kits, and when our technicians test a sample from their equipment, they check not just viscosity and wear metals, but also demulsibility. If we see that the demulsibility time is starting to extend beyond 15 minutes, that\u2019s a warning sign that the lubricant is contaminated or starting to degrade. We\u2019ll work with the maintenance team to flush the system if needed, adjust their oil change schedule, or recommend a different product in our series that\u2019s better suited to their current conditions. This proactive approach has helped several mines avoid major equipment failures by catching issues early.<\/p>\n

I\u2019ve been working in mine lubrication for over 12 years, and I\u2019ve seen first-hand how a lack of attention to demulsibility can sink even the most well-run mine. A few years ago, we had a customer in Kentucky who had been using a cheap, generic gear oil for their conveyors. Within 18 months, three of their main conveyor gearboxes failed, and they had to pull the entire line out of service for two weeks to replace them. The repair cost was over $300,000, plus they lost an estimated $2 million in production during that time. When they switched to our Mine Gear Oil Series, with its targeted demulsibility rating, they haven\u2019t had a gearbox failure related to water in the last seven years. The maintenance director there told me that demulsibility is the first thing he looks for now when choosing a lubricant, because he learned the hard way that cutting corners there costs way more in the long run.<\/p>\n

If you\u2019re involved in mine operations\u2014whether you\u2019re a maintenance manager, a general manager, or a procurement specialist\u2014you know that every part of your equipment relies on the lubricant you choose. Demulsibility isn\u2019t just a technical term; it\u2019s a measure of how well your lubricant can protect your investment in the wettest, hardest-working parts of your site. Our Mine Lubricating Oil Series is formulated specifically for the unique challenges of mining, with demulsibility ratings tested and proven to perform in the exact conditions your equipment faces. We don\u2019t just sell oil; we work with you to understand your specific operation, recommend the right products, and provide ongoing support to make sure your lubricants are always performing as they should.<\/p>\n

<\/p>\n

If you\u2019re dealing with water-related equipment issues, or if you want to learn more about how our Mine Lubricating Oil Series can improve your operation\u2019s reliability and reduce downtime, we encourage you to reach out to our team for a procurement consultation. We\u2019re here to answer your technical questions, provide sample testing, and help you find the right lubrication solution for your mine\u2019s needs.<\/p>\n

Hydraulic Transmission Oil<\/a> References
\nASTM D2710, Standard Test Method for Demulsibility Characteristics of Petroleum Oils and Synthetic Fluids. American Society for Testing and Materials, West Conshohocken, PA, 2020.
\nMine Lubrication: Demulsibility Requirements for Wet Operating Environments. National Institute for Occupational Safety and Health (NIOSH), 2018.
\nLubricant Additives: Chemistry and Applications, 2nd Edition. Leslie R. Rudnick, CRC Press, 2009.
\nIndustrial Lubricant Performance in Harsh Mining Applications. Society of Tribologists and Lubrication Engineers (STLE), 2021.
\nWater Contamination in Hydraulic Systems: Impacts and Mitigation Strategies. International Journal of Mining, Reclamation and Environment, Vol. 34, No. 7, 2020, pp. 489-502.<\/p>\n

\n

Shandong Sanjing Lubrication Technology Co., Ltd.<\/a>
Shandong Sanjing Lubrication Technology Co., Ltd. is one of the most professional mine lubricating oil manufacturers and suppliers in China, specialized in providing high quality products and service. We warmly welcome you to buy customized mine lubricating oil made in China here from our factory.
Address: 130 meters south of Yunlong Road, East of Cherry Blossom Road, Liangshan Economic Development Zone, Jining City, Shandong Province, China.
E-mail: 15069730766@163.com
WebSite: https:\/\/www.sanjinglube.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

What is the demulsibility of Mine Lubricating Oil Series? Mine Lubricating Oil Series If you\u2019ve ever … What is the demulsibility of Mine Lubricating Oil Series?<\/span>Read more<\/a><\/p>\n","protected":false},"author":256,"featured_media":550,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[513],"class_list":["post-550","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-mine-lubricating-oil-series-4b73-e78adf"],"_links":{"self":[{"href":"http:\/\/www.jorgeluislh.com\/blog\/wp-json\/wp\/v2\/posts\/550","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.jorgeluislh.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.jorgeluislh.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.jorgeluislh.com\/blog\/wp-json\/wp\/v2\/users\/256"}],"replies":[{"embeddable":true,"href":"http:\/\/www.jorgeluislh.com\/blog\/wp-json\/wp\/v2\/comments?post=550"}],"version-history":[{"count":0,"href":"http:\/\/www.jorgeluislh.com\/blog\/wp-json\/wp\/v2\/posts\/550\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.jorgeluislh.com\/blog\/wp-json\/wp\/v2\/posts\/550"}],"wp:attachment":[{"href":"http:\/\/www.jorgeluislh.com\/blog\/wp-json\/wp\/v2\/media?parent=550"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.jorgeluislh.com\/blog\/wp-json\/wp\/v2\/categories?post=550"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.jorgeluislh.com\/blog\/wp-json\/wp\/v2\/tags?post=550"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}